#Qlab windows 10 software

This is all you need to know for a basic network setup between Eos and QLab - for more detail, see the et cetera blog post on IP addresses and subnets.ĮTC uses default IP addresses per product type, as detailed in this article. Another device with the IP address 192.168.1.55 could not talk to them. In the example above, the two Eos family consoles can talk to each other because they share the 10.101.

Consequently, for 2 devices to be on the same subnet, their first 2 numbers must be the same (10.101.), but the remaining numbers can be different (and at least one of them must be).

Set the Subnet Mask on every device to 255.255.0.0.

Subnets are complex, but we can keep it simple for now: So with two Eos family consoles, one could have the address 10.101.100.20, and the other 10.101.90.101 - so far so simple.īut the IP addresses of two devices must be in the same subnet, if those devices want to talk to each other. An IP address consists of 4 digits between 0 and 254 separated by decimal points. The trade-off is that OSC can be more time-consuming to set up.įor an in-depth look at how OSC is implemented in Eos, see the Eos Manual.Įach device on a network must have an IP address, which must be unique within that network. The advantage of OSC is that no additional MIDI hardware is required, as everything happens on the network, and that OSC is much more powerful.

Luckily, both Eos and QLab are flexible enough to avoid this.įormerly, the MIDI protocol was commonly used for this purpose.

#Qlab windows 10 software

If the sound software can only output in the format '/cue/1/go', but the lighting console can only understand in the format '/lights/cue/1/fire', we have a problem. Part of the trick in getting different devices to talk to each other is to have them speak each other's language. Other devices implement OSC in different ways for example, QLab would understand the incoming command '/cue/1/start'.

For example, Eos can understand commands like '/eos/chan/1/out', which would turn off channel 1, or '/eos/cue/1/fire' to run Cue 1. OSC is an open protocol which allows the sending and receiving of human-readable messages between sound, lighting and other entertainment technology systems.